MeanWell HSP-200-5 Switching LED Panel Power Supply.
Model Number:HSP-200-5.
Case Size:210×62×31mm.
Güç: 200K
Output Type:Bekar
Output Current:40A
Çıkış Gerilimi:5V
Çıkış Gücü:101 ??200K
Output Frequency:47 ~ 63Hz
Giriş Gerilimi:90~264VAC
Sertifikasyon:UL TUV CB EMC CE
Yeterlik:88.5%
Ouput Voltage Adj.
Menzil:4.5~5.5V
Başvuru:Industries mechanica automation, vesaire
Özellik:Low profile 31mm;PFC; Uyumlu kaplamalı
MeanWell HSP-200-5 Switching LED Panel Power Supply Product Specifications :
Modeli | HSP-200-5 | |
Giriş | Voltage Range | 85~ 264VAC 120~ 370VAC |
FREQUENCY RANGE | 47 ~ 63Hz | |
AC CURRENT (Tip.) | 3.5A/115VAC 1.5A/230VAC | |
KAÇAK AKIMI | <2mA / 240VAC | |
AKIŞ AKIMI (Tip.) | COLD START 65A/230VAC | |
YETERLİK (Tip.) | 88.5% | |
Çıkış | NOMİNAL AKIM | 40A |
DC GERİLİM | 5V | |
NOMİNAL GÜÇ | 200K | |
MEVCUT ARALIK | 0-40A | |
VOLTAGED ADJ. MENZİL | 4.5~ 5.5V | |
DALGALANMA & GÜRÜLTÜ (maks.) Not.2 | 150mVp-p | |
VOLTAGE TOLERANCE Note.3 | ±%2,0 | |
LOAD REGULATION Note.5 | ±1.5% | |
LINE REGULATION Note.4 | ±%0,5 | |
BEKLEME ZAMANI | 20ms at full load | |
KURMAK, RISE TIME | 600Bayan,40ms at full load | |
Koruma | OVER VOLTAGE | 5.5~ 7V Koruma türü :Shut off 0/p volltage, clamping by zener diode |
OVER LOAD | Above 150% rated output power Koruma türü :Hiccup mode, recovers automatically after fault condition is removed |
|
Emniyet | DAYANIM GERİLİMİ | G/Ç-Ç/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 onaylı | |
İZOLASYON DİRENCİ | G/Ç-Ç/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% Sağ | |
EMC STANDARTLARI | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
Environment | ÇALIŞMA NEMİ | 20 ~ 90% RH yoğunlaşmayan |
ÇALIŞMA SICAKLIĞI | -20 ~ +70 (Refer to output load derating curve) | |
SICAKLIK. KATSAYI | ± 0.03% | |
STORAGE TEMP., NEM | -40 ~ +85 , 10 ~ 95% Sağ | |
TİTREŞİM | 10 ~ 500Hz, 2G 10min./1cycle, 60dk.. her biri X boyunca, e, Z eksenleri | |
Diğerleri | BOYUT | 215*62*31mm (U*G*Y) |
MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
Not | BEN. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Dalgalanma & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% ile 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies??/td> |
Yorumlar
Henüz yorum yok.