การ์ดรับสัญญาณ LED Novastar MRV366 พร้อม 16 พอร์ต HUB75
The MRV366 is a new receiving card developed by NovaStar. A single MRV366 loads up to 512×256 pixels.
The MRV366 supports pixel level brightness and chroma calibration, which effectively removes color difference, greatly improves display consistency of LED images, and presents finer displays to users.
Software and hardware designs of the MRV366 have fully concerned users’ deployment, operating and maintenance scenarios, ช่วยให้ปรับใช้ได้ง่ายขึ้น, การดำเนินงานมีเสถียรภาพมากขึ้นและการบำรุงรักษาที่มีประสิทธิภาพมากขึ้น.
การออกแบบฮาร์ดแวร์:
Integrates 16 standard HUB75 connectors, which makes the HUB board unnecessary.
Adopts the Gigabit Ethernet port, which can connect to the PC.
การออกแบบซอฟต์แวร์:
Supports pixel level brightness and chroma calibration.
Supports setting of images pre-stored in the receiving card.
Supports status detection of temperature, แรงดันไฟฟ้า, Ethernet cable communication and video source signals.
Supports the 5-pin LCD module.
การ์ดรับสัญญาณ LED Novastar MRV366 พร้อม 16 พอร์ต HUB75
| คุณสมบัติ | คำอธิบาย |
| Supporting pixel level brightness
and chroma calibration |
Brightness and chroma calibration
on NovaLCT for each pixel could remove color difference effectively, make the brightness and chroma of the whole screen highly consistent, and improve the display effect. |
| Supporting setting of images
pre-stored in the receiving card |
On NovaLCT, the specified images
could be set as the screen startup image and images used when the Ethernet cable is disconnected or no video source signal is available. |
| Supporting status detection of temperature, แรงดันไฟฟ้า, อีเทอร์เน็ต
cable communication and video source signals |
On NovaLCT, the status of receiving
card’s temperature, แรงดันไฟฟ้า, อีเทอร์เน็ต cable communication and video source signals can be detected. |
| Supporting LCD module | Supports NovaStar’s general 5-pin
LCD module. The LCD module is connected to the HUB board to display temperature, แรงดันไฟฟ้า, single operating time and total operating time of the receiving card. |
| Supporting readback of configuration file | On NovaLCT (V5.0.0 or later), ที่
configuration information stored in the receiving card can be read back. |
| Supporting readback of firmware version | On NovaLCT (V5.0.0 or later), ที่
firmware versions of the receiving card can be read back. |
The MRV366 is applied to the LED display synchronous system which is generally composed of the LED display, รับบัตร, LED display controller and controller peripherals. The receiving card is connected to the LED display over HUB connectors.
The synchronous system requires connecting a computer to display the computer’s images and texts on the LED display. The synchronous system’s structure is shown in the following figure.
รีวิว
ยังไม่มีบทวิจารณ์.