MeanWell HSP-300-5 Switching LED Power Source.
Primer:806 Velikost:215×115×30 mm.
Moč: 300W.
Visoka učinkovitost do 90%.
Vgrajena aktivna funkcija PFC, PF>0.95.
LED indikator za vklop.
Forced air cooling by built in DC Fan with fan speed control function.
1U nizek profil 30 mm.
Visoka učinkovitost, Long life and high reliability.
Zaščite: Kratek stik / Preobremenitev / Prenapetost / nad temperaturo.
1 leto garancije.
MeanWell HSP-300-5 Switching LED Power Source Product Specifications :
Model | HSP-300-5 | |
Vnos | Voltage Range | 85~ 264VAC 120~ 370VAC |
FREQUENCY RANGE | 47 ~ 63Hz | |
AC CURRENT (Tip.) | 3.5A/115VAC 1.5A/230VAC | |
URADNI TOK | <2mA / 240VAC | |
VSTOPNI TOK (Tip.) | COLD START 65A/230VAC | |
UČINKOVITOST (Tip.) | 87% | |
Izhod | NAZIVNI TOK | 60A |
DC NAPETOST | 5V | |
NAZIVNA MOČ | 300W | |
TRENUTNI RAZPON | 0-60A | |
VOLTAGED ADJ. RANGE | 4.75~ 5.5V | |
RIPPLE & HRUP (maks.) Opomba.2 | 100mVp-p | |
VOLTAGE TOLERANCE Note.3 | ±2,0 % | |
LOAD REGULATION Note.5 | ±1.5% | |
LINE REGULATION Note.4 | ±0,5 % | |
ZDRŽI ČAS | 20ms at full load | |
NASTAVITEV, RISE TIME | 600ms,40ms at full load | |
Zaščita | OVER VOLTAGE | 5.5~ 6.75V Vrsta zaščite :Shut off 0/p volltage, clamping by zener diode |
OVER LOAD | Above 150% rated output power Vrsta zaščite :Hiccup mode, recovers automatically after fault condition is removed |
|
Varnost | VZDRŽI NAPETOST | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 odobreno | |
IZOLACIJSKA ODPORNOST | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH | |
EMC STANDARDI | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
Environment | DELOVNA VLAGA | 20 ~ 90% RH non-condensing |
DELOVNA TEMP | -20 ~ +70 (Refer to output load derating curve) | |
TEMP. KOEFICIENT | ± 0.03% | |
STORAGE TEMP., VLAŽNOST | -40 ~ +85 , 10 ~ 95% RH | |
VIBRACIJE | 10 ~ 500 Hz, 2G 10min./1cycle, 60min. vsak vzdolž X, Y, Z osi | |
drugi | DIMENZIJA | 215*115*30mm (D*Š*V) |
MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
Opomba | jaz. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Valovanje & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% do 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies |
Ocene
Ni še nobene ocene.