MeanWell HSP-200-5 Switching LED Panel Power Supply.
Model Number:HSP-200-5.
Case Size:210×62×31mm.
Sila: 200W
Output Type:Slobodný
Output Current:40A
Výstupné napätie:5V
Výstupný výkon:101 ??200W
Output Frequency:47 ~ 63Hz
Vstupné napätie:90~264 VAC
Certifikácia:UL TUV CB EMC CE
Efektívnosť:88.5%
Ouput Voltage Adj.
Range:4.5~ 5,5 V
Aplikácia:Industries mechanica automation, atď
Funkcia:Low profile 31mm;PFC; Konformne potiahnutá
MeanWell HSP-200-5 Switching LED Panel Power Supply Product Specifications :
| Model | HSP-200-5 | |
| Vstup | Voltage Range | 85~ 264VAC 120~ 370VAC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| AC CURRENT (Typ.) | 3.5A/115VAC 1.5A/230VAC | |
| ÚNIKOVÝ PRÚD | <2mA / 240VAC | |
| INRUSH PRÚD (Typ.) | COLD START 65A/230VAC | |
| EFEKTÍVNOSŤ (Typ.) | 88.5% | |
| Výstup | MENOVÝ PRÚD | 40A |
| DC NAPÄTIE | 5V | |
| MENOVITÝ VÝKON | 200W | |
| AKTUÁLNY ROZSAH | 0-40A | |
| VOLTAGED ADJ. ROZSAH | 4.5~ 5.5V | |
| VLNAŤ & HLUK (max.) Poznámka.2 | 150mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±2,0 % | |
| LOAD REGULATION Note.5 | ±1.5% | |
| LINE REGULATION Note.4 | ±0,5 % | |
| VYDRŽAŤ ČAS | 20ms at full load | |
| NASTAVENIE, RISE TIME | 600pani,40ms at full load | |
| Ochrana | OVER VOLTAGE | 5.5~ 7V Typ ochrany :Shut off 0/p volltage, clamping by zener diode |
| OVER LOAD | Above 150% rated output power Typ ochrany :Hiccup mode, recovers automatically after fault condition is removed |
|
| Bezpečnosť | VYDRŽAŤ NAPÄTIE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 schválené | |
| ODOLNOSŤ IZOLÁCIE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH | |
| ŠTANDARDY EMC | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
| Environment | PRACOVNÁ VLHKOSŤ | 20 ~ 90% RH non-condensing |
| PRACOVNÁ TEPLOTA | -20 ~ +70 (Refer to output load derating curve) | |
| TEPL. KOEFICIENT | ± 0.03% | |
| STORAGE TEMP., VLHKOSŤ | -40 ~ +85 , 10 ~ 95% RH | |
| VIBRÁCIA | 10 ~ 500 Hz, 2G 10min./1cycle, 60min. každý pozdĺž X, Y, Z osi | |
| Iní | DIMENSION | 215*62*31mm (L*W*V) |
| MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
| Poznámka | ja. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Zvlnenie & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% do 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies??/td> |
|
Recenzie
Zatiaľ tu nie sú žiadne recenzie.