Colorlight LED Controller i5+ receiving card is Colorlight specially introduced for general project, featuring a small size with 68×36mm; It adopts DDR2 SODIMM interface, which can easily integrated into the HUB board or unit plate of led display, loading capacity: 512×384 pixels.
i5 video controller card has all the functions of the mainstream receiver card. Besides, it also supports 32 groups of RGB signal output, which easily fit with all the mainstream led display receiving card.
Colorlight Synchronous LED Receiver & LED Receiving Card such as i5A Receiver Card,i5A Dual-mode Card,i5A-905 Receiver Card,i5A-907 … i5 LED Receiver Card
Colorlight i5 LED Display Receiver Card, LED Control System Receiving Card, Support 32 groups of RGB signal output, Large load capacity of 256*256 pixels
Colorlight LED Controller i5+ Receiving Card Synchronous System Features
·Tiny size: 68×36mm, DDR2 SODIMM interface, easy for maintenance
·Supports 32 groups of RGB signal output
·Loading capacity: 384×512 pixels
·High-precision point-by-point calibration in the brightness and chromaticity
·Supports any scan mode from static to 1/64 scan
·Supports wide working voltage of DC 3.8V~5.5V
Control system parameters | |
---|---|
Capacity | Full-color: 512×384 pixels |
Cascade Control Area of the Largest Region | 65536×65536 pixels |
Network Port Exchange | Supported, arbitrary use |
Gray Level | Maximum 65536 levels |
Display module compatibility | |
---|---|
Chip Supports | Supports conventional chips, PWM chips and other mainstream chips |
Scan Mode | Two scanning methods to support refresh rate multiplier |
Scan Type | Supports static sweep to 1/32 scan |
Module Specifications Support | Supports 4096 pixels within any row, any column |
Cable Direction | Supports route from left to right, from right to left, from top to bottom, from bottom to top |
Data Sets | 32 RGB data sets |
Data folded | Supports 1~8 any discount to improve refresh rate |
Data exchange | 32 sets of data any exchange |
Module snapshot | Supports any pumping point |
Compatible device and interface type | |
---|---|
Communication distance | UTP cable 40mCAT6 cable 70m
OPTIC FIBER transmission distance unrestricted |
Compatible with transmission equipment | Gigabit switch, fiber converter, optical switches |
Physical parameters | |
---|---|
Size | 68×36mm |
Input voltage | DC 3.3V~6V |
Rated current | 0.5A |
Rated power | 2.5W |
Operating Temperature | -25℃~75 |
Weight | 9.5g |
Pixel level calibration | |
---|---|
Brightness Calibration | Supported |
Chromaticity Calibration | Supported |
Reviews
There are no reviews yet.