MEANWell NEL-400-5 Switching Power Supply Manufacturer.
Rozmiar:215×115×30mm.
Moc: 400W.
Wysoka wydajność do 90%.
Wbudowana aktywna funkcja PFC, PF>0.95.
Wskaźnik LED włączania zasilania.
Forced air cooling by built in DC Fan with fan speed control function.
1U niskoprofilowy 30mm
Wysoka wydajność, Long life and high reliability
Zabezpieczenia: Zwarcie / Przeciążać / Nadmierne napięcie / nadmierna temperatura
1 rok gwarancji
MEANWell NEL-400-5 Switching Power Supply Manufacturer Product Specifications :
| Model | NEL-400-5 | |
| Wejście | Voltage Range | 85~ 264VAC 120~ 370VAC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| AC CURRENT (Typ.) | 3.5A/115VAC 1.5A/230VAC | |
| PRĄD Upływowy | <2mama / 240ODKURZACZ | |
| PRĄD ROZRUCHOWY (Typ.) | COLD START 65A/230VAC | |
| EFEKTYWNOŚĆ (Typ.) | 84% | |
| Wyjście | PRĄD ZNAMIONOWY | 80A |
| NAPIĘCIE DC | 5V | |
| MOC ZNAMIONOWA | 400W | |
| AKTUALNY ZAKRES | 0-80A | |
| VOLTAGED ADJ. ZAKRES | 4.5~ 5.5V | |
| MARSZCZYĆ & HAŁAS (maks.) Uwaga.2 | 150mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±2,0% | |
| LOAD REGULATION Note.5 | ±1.5% | |
| LINE REGULATION Note.4 | ±0,5% | |
| WSTRZYMAJ CZAS | 20ms at full load | |
| ORGANIZOWAĆ COŚ, RISE TIME | 600SM,40ms at full load | |
| Ochrona | OVER VOLTAGE | 5.6~ 7V Typ ochrony :Shut off 0/p volltage, clamping by zener diode |
| OVER LOAD | Above 150% rated output power Typ ochrony :Hiccup mode, recovers automatically after fault condition is removed |
|
| Bezpieczeństwo | WYTRZYMAĆ NAPIĘCIE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 zatwierdzony | |
| ODPORNOŚĆ NA IZOLACJĘ | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% PRAWA | |
| NORMY EMC | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
| Environment | WILGOTNOŚĆ PRACY | 20 ~ 90% RH non-condensing |
| TEMPERATURA PRACY | -20 ~ +70 (Refer to output load derating curve) | |
| TEMP. WSPÓŁCZYNNIK | ± 0.03% | |
| STORAGE TEMP., WILGOTNOŚĆ | -40 ~ +85 , 10 ~ 95% PRAWA | |
| WIBRACJA | 10 ~500 Hz, 2G 10min./1cycle, 60min. każdy wzdłuż X, Y, Osie Z | |
| Inni | WYMIAR | 215*115*30mm (L*W*H) |
| MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
| Notatka | I. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Marszczyć & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% Do 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies. |
|
Recenzje
Nie ma jeszcze żadnych recenzji.