MEANWell NEL-400-5 Switching Power Supply Manufacturer.
Dydis:215× 115 × 30 mm.
Galia: 400W.
Didelis efektyvumas iki 90%.
Integruota aktyvi PFC funkcija, PF>0.95.
LED indikatorius, skirtas įjungti.
Forced air cooling by built in DC Fan with fan speed control function.
1U žemo profilio 30mm
Didelis efektyvumas, Long life and high reliability
Apsaugos: Trumpas sujungimas / Perkrova / Virš įtampa / over temperature
1 metų garantija
MEANWell NEL-400-5 Switching Power Supply Manufacturer Product Specifications :
| Modelis | NEL-400-5 | |
| Įvestis | Voltage Range | 85~ 264VAC 120~ 370VAC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| AC CURRENT (Tip.) | 3.5A/115VAC 1.5A/230VAC | |
| NUOTĖKIO SROVĖS | <2mA / 240VAC | |
| IŠĖJIMO SROVĖ (Tip.) | COLD START 65A/230VAC | |
| EFEKTYVUMAS (Tip.) | 84% | |
| Išvestis | ĮVERTINTA SROVĖ | 80A |
| DC ĮTAMPA | 5V | |
| VARDINĖ GALIA | 400W | |
| DABARTINĖ DIAPAZONAS | 0-80A | |
| VOLTAGED ADJ. DIAPAZONAS | 4.5~ 5.5V | |
| RIPPLE & TRIUKŠMAS (maks.) Užrašas 2 | 150mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±2,0 % | |
| LOAD REGULATION Note.5 | ±1.5% | |
| LINE REGULATION Note.4 | ±0,5 % | |
| SULAIK LAIKO | 20ms at full load | |
| NUSTATYMAS, RISE TIME | 600ms,40ms at full load | |
| Apsauga | OVER VOLTAGE | 5.6~ 7V Apsaugos tipas :Shut off 0/p volltage, clamping by zener diode |
| OVER LOAD | Above 150% rated output power Apsaugos tipas :Hiccup mode, recovers automatically after fault condition is removed |
|
| Saugumas | ATLIEKA ĮTAMPĄ | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 patvirtino | |
| IZOLIACIJOS ATSPARUMAS | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH | |
| EMC STANDARTAI | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
| Aplinka | DARBO DRĖGMĖ | 20 ~ 90% RH non-condensing |
| DARBO TEMPERATŪRA | -20 ~ +70 (Refer to output load derating curve) | |
| TEMP. KOEFICIENTAS | ± 0.03% | |
| STORAGE TEMP., DRĖGMĖ | -40 ~ +85 , 10 ~ 95% RH | |
| VIBRACIJA | 10 ~500Hz, 2G 10min./1cycle, 60min. kiekvienas išilgai X, Y, Z ašys | |
| Kiti | MATMENYS | 215*115*30mm (L*P*H) |
| MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
| Pastaba | aš. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Ripple & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% į 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies. |
|
Atsiliepimai
Kol kas atsiliepimų nėra.