MeanWell HSP-200-5 Switching LED Panel Power Supply.
Model Number:HSP-200-5.
Case Size:210×62×31mm.
Galia: 200W
Output Type:Vienišas
Output Current:40A
Išėjimo įtampa:5V
Išėjimo galia:101 ??200W
Output Frequency:47 ~ 63Hz
Įvesties įtampa:90~264VAC
Sertifikavimas:UL TUV CB EMC CE
Efektyvumas:88.5%
Ouput Voltage Adj.
Range:4.5~5,5V
Taikymas:Industries mechanica automation, ir tt
Funkcija:Low profile 31mm;PFC; Konformalia danga
MeanWell HSP-200-5 Switching LED Panel Power Supply Product Specifications :
Modelis | HSP-200-5 | |
Įvestis | Voltage Range | 85~ 264VAC 120~ 370VAC |
FREQUENCY RANGE | 47 ~ 63Hz | |
AC CURRENT (Tip.) | 3.5A/115VAC 1.5A/230VAC | |
NUOTEKO SROVĖ | <2mA / 240VAC | |
IŠĖJIMO SROVĖ (Tip.) | COLD START 65A/230VAC | |
EFEKTYVUMAS (Tip.) | 88.5% | |
Išvestis | ĮVERTINTA SROVĖ | 40A |
DC ĮTAMPA | 5V | |
VARDINĖ GALIA | 200W | |
DABARTINĖ DIAPAZONAS | 0-40A | |
VOLTAGED ADJ. RANGE | 4.5~ 5.5V | |
RIPPLE & TRIUKŠMAS (maks.) Pastaba.2 | 150mVp-p | |
VOLTAGE TOLERANCE Note.3 | ±2,0 % | |
LOAD REGULATION Note.5 | ±1.5% | |
LINE REGULATION Note.4 | ±0,5 % | |
SULAIK LAIKO | 20ms at full load | |
NUSTATYMAS, RISE TIME | 600ms,40ms at full load | |
Apsauga | OVER VOLTAGE | 5.5~ 7V Apsaugos tipas :Shut off 0/p volltage, clamping by zener diode |
OVER LOAD | Above 150% rated output power Apsaugos tipas :Hiccup mode, recovers automatically after fault condition is removed |
|
Saugumas | ATLIEKA ĮTAMPĄ | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 patvirtino | |
IZOLIACIJOS ATSPARUMAS | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH | |
EMC STANDARTAI | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
Environment | DARBO DRĖGMĖ | 20 ~ 90% RH non-condensing |
DARBO TEMPERATŪRA | -20 ~ +70 (Refer to output load derating curve) | |
TEMP. KOEFICIENTAS | ± 0.03% | |
STORAGE TEMP., DRĖGMĖ | -40 ~ +85 , 10 ~ 95% RH | |
VIBRACIJA | 10 ~500Hz, 2G 10min./1cycle, 60min. kiekvienas išilgai X, Y, Z ašys | |
Kiti | MATMENYS | 215*62*31mm (L*P*H) |
MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
Pastaba | aš. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Ripple & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% į 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies??/td> |
Atsiliepimai
Kol kas atsiliepimų nėra.