MEANWell NEL-400-5 Switching Power Supply Manufacturer.
Misurare:215×115×30mm.
Energia: 400W.
Alta efficienza fino a 90%.
Funzione PFC attiva incorporata, PF>0.95.
Indicatore LED per l'accensione.
Forced air cooling by built in DC Fan with fan speed control function.
1U basso profilo 30mm
Alta efficienza, Long life and high reliability
Protezioni: Cortocircuito / Sovraccarico / Sovratensione / sovratemperatura
1 anno di garanzia
MEANWell NEL-400-5 Switching Power Supply Manufacturer Product Specifications :
| Modello | NEL-400-5 | |
| Ingresso | Voltage Range | 85~ 264VAC 120~ 370VAC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| AC CURRENT (Tip.) | 3.5A/115VAC 1.5A/230VAC | |
| CORRENTE DI DISPERSIONE | <2ma / 240V.AC | |
| CORRENTE DI SBLOCCO (Tip.) | COLD START 65A/230VAC | |
| EFFICIENZA (Tip.) | 84% | |
| Produzione | CORRENTE NOMINALE | 80UN |
| TENSIONE CC | 5V | |
| POTENZA NOMINALE | 400W | |
| GAMMA ATTUALE | 0-80UN | |
| VOLTAGED ADJ. ALLINEARE | 4.5~ 5.5V | |
| ONDULAZIONE & RUMORE (massimo) Nota.2 | 150mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±2,0% | |
| LOAD REGULATION Note.5 | ±1.5% | |
| LINE REGULATION Note.4 | ±0,5% | |
| TENERE TEMPO | 20ms at full load | |
| IMPOSTARE, RISE TIME | 600SM,40ms at full load | |
| Protezione | OVER VOLTAGE | 5.6~ 7V Tipo di protezione :Shut off 0/p volltage, clamping by zener diode |
| OVER LOAD | Above 150% rated output power Tipo di protezione :Hiccup mode, recovers automatically after fault condition is removed |
|
| Sicurezza | RESISTERE ALLA TENSIONE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 approvato | |
| RESISTENZA ALL'ISOLAMENTO | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VCC / 25 / 70% RH | |
| STANDARD EMC | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
| Environment | UMIDITÀ DI LAVORO | 20 ~ 90% RH non-condensing |
| TEMP. DI LAVORO | -20 ~ +70 (Refer to output load derating curve) | |
| TEMP. COEFFICIENTE | ± 0.03% | |
| STORAGE TEMP., UMIDITÀ | -40 ~ +85 , 10 ~ 95% RH | |
| VIBRAZIONE | 10 ~500Hz, 2G 10min./1cycle, 60min. ciascuno lungo X, Y, Assi Z | |
| Altri | DIMENSIONE | 215*115*30mm (L*L*A) |
| MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
| Nota | IO. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Ondulazione & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% A 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies. |
|
Recensioni
Non ci sono ancora recensioni.