Novastar VX600 LED myndbandsörgjörvi Allt-í-einn LED skjámyndastýring

Novastar VX600 LED myndbandsörgjörvi Allt-í-einn LED skjámyndastýring.

The VX600 is NovaStar’s new all-in-one controller that integrates video processing and video control into one box. It features 6 Ethernet ports and supports video controller, fiber converter and Bypass working modes. A VX600 unit can drive up to 3.9 milljón pixlar, with the maximum output width and height up to 10,240 pixlar og 8192 pixels respectively, which is ideal for ultra-wide and ultra-high LED screens.

The VX600 is capable of receiving a variety of video signals and processing high-resolution images. Auk þess, the device features stepless output scaling, low latency, pixel-level brightness and chroma calibration and more, to present you with an excellent image display experience.

Það sem meira er, the VX600 can work with NovaStar’s supreme software NovaLCT and V-Can to greatly facilitate your infield operations and control, such as screen configuration, Ethernet port backup settings, layer management, preset management and firmware update.

Thanks to its powerful video processing and sending capabilities and other outstanding features, the VX600 can be widely used in applications such as medium and high-end rental, stage control systems and fine-pitch LED screens.

Novastar VX600 LED Video Processor All-in-one LED Display Video Controller Features??/sterkur>

·Input connectors
1x HDMI 1.3 (IN & LYKKJA)
1x HDMI 1.3
1x DVI (IN & LYKKJA)
1x 3G-SDI (IN & LYKKJA)
1x 10G optical fiber port (OPT1)

·Output connectors
6x Gigabit Ethernet tengi
A single device unit drives up to 3.9 milljón pixlar, with a maximum width of 10,240 pixlar og hámarkshæð á 8192 pixlum.
2x Fiber outputs
OPT 1 copies the output on 6 Ethernet tengi.
OPT 2 copies or backs up the output on 6 Ethernet tengi.
1x HDMI 1.3
For monitoring or video output

·Self-adaptive OPT 1 for either video input or sending card output Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device.

·Audio input and output
Audio input accompanied with HDMI input source
Audio output via a multifunction card
Output volume adjustment supported

·Low latency
Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled.

·3x layers
Adjustable layer size and position
Adjustable layer priority

·Output synchronization
An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync.

·Powerful video processing
Based on SuperView III image quality
processing technologies to provide stepless
output scaling
One-click full screen display
Free input cropping

·Easy preset saving and loading
Allt að 10 user-defined presets supported
Load a preset by simply pressing one button

·Multiple kinds of hot backup
Backup between devices
Backup between Ethernet ports
Backup between input sources

·Mosaic input source supported
The mosaic source is composed of two sources
(2K× accessed to the OPT 1.

·Up to 4 units cascaded for image mosaic

·Three working modes
Vídeó stjórnandi
Trefjabreytir
Bypass

·All-round color adjustment
Input source and LED screen color adjustment supported, including brightness, andstæða,mettun, hue and Gamma Pixel level brightness and chroma calibration

·Work with NovaLCT and NovaStar calibration software to support brightness and chroma calibration on each LED, effectively removing color discrepancies and greatly improving LED display brightness and chroma consistency,sem gerir ráð fyrir betri myndgæðum.

·Multiple operation modes

Control the device as you wish via V-Can,NovaLCT or device front panel knob and buttons.