MeanWell HSP-300-5 Switching LED Power Source.
מִקרֶה:806 גוֹדֶל:215×115×30 מ"מ.
כּוֹחַ: 300W.
יעילות גבוהה עד 90%.
פונקציית PFC פעילה מובנית, PF>0.95.
מחוון LED להפעלה.
Forced air cooling by built in DC Fan with fan speed control function.
1U פרופיל נמוך 30 מ"מ.
יעילות גבוהה, Long life and high reliability.
הגנות: קצר חשמלי / לְהַעֲמִיס יוֹתֵר מִדַי / מתח יתר / מעל טמפרטורה.
1 שנה אחריות.
MeanWell HSP-300-5 Switching LED Power Source Product Specifications :
| דֶגֶם | HSP-300-5 | |
| קֶלֶט | Voltage Range | 85~ 264VAC 120~ 370VAC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| AC CURRENT (טיפ.) | 3.5A/115VAC 1.5A/230VAC | |
| זרם דליפה | <2אִמָא / 240VAC | |
| INRUSH CURRENT (טיפ.) | COLD START 65A/230VAC | |
| יְעִילוּת (טיפ.) | 87% | |
| תְפוּקָה | מדורג נוכחי | 60א |
| מתח DC | 5V | |
| כוח מדורג | 300W | |
| טווח נוכחי | 0-60א | |
| VOLTAGED ADJ. לָנוּעַ | 4.75~ 5.5V | |
| אַדְוָה & רַעַשׁ (מקסימום) הערה.2 | 100mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±2.0% | |
| LOAD REGULATION Note.5 | ±1.5% | |
| LINE REGULATION Note.4 | ±0.5% | |
| זמן המתנה | 20ms at full load | |
| הגדרה, RISE TIME | 600גְבֶרֶת,40ms at full load | |
| הֲגָנָה | OVER VOLTAGE | 5.5~ 6.75V Protection type :Shut off 0/p volltage, clamping by zener diode |
| OVER LOAD | Above 150% rated output power Protection type :Hiccup mode, recovers automatically after fault condition is removed |
|
| בְּטִיחוּת | עמידה בפני מתח | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 מְאוּשָׁר | |
| התנגדות לבידוד | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH | |
| תקני EMC | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
| Environment | לחות עבודה | 20 ~ 90% RH non-condensing |
| טמפרטורת עבודה | -20 ~ +70 (Refer to output load derating curve) | |
| TEMP. מְקַדֵם | ± 0.03% | |
| STORAGE TEMP., לַחוּת | -40 ~ +85 , 10 ~ 95% RH | |
| רֶטֶט | 10 ~ 500Hz, 2G 10min./1cycle, 60דקה. כל אחד לאורך X, י, צירי Z | |
| אחרים | מֵמַד | 215*115*30מ"מ (L*W*H) |
| MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
| פֶּתֶק | אֲנִי. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 אַדְוָה & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% אֶל 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies |
|
ביקורות
אין עדיין ביקורות.