MeanWell LRS-350-5 Switching LED Video Screen Power Supply (5V 60A 300W).
Cas:806 Taille:215×115×30mm.
Pouvoir: 300W.
100% test de rodage à pleine charge
Universal AC input/ full range
Fonction PFC active intégrée, PF>0.95
Protections: Short circuit/ Over load/ Over voltage
Indicateur LED pour la mise sous tension
1 an de garantie
UL passé
MeanWell LRS-350-5 Switching LED Video Screen Power Supply Product Specifications :
Modèle | LRS-350-5 | |
Saisir | Voltage Range | 85~ 264VAC 120~ 370VAC |
FREQUENCY RANGE | 47 ~ 63Hz | |
AC CURRENT (Typ.) | 3.5A/115VAC 1.5A/230VAC | |
COURANT DE FUITE | <2mA / 240ACC | |
COURANT D'APPEL (Typ.) | COLD START 65A/230VAC | |
EFFICACITÉ (Typ.) | 83% | |
Sortir | COURANT NOMINAL | 60UN |
TENSION CC | 5V | |
PUISSANCE NOMINALE | 300W | |
GAMME ACTUELLE | 0-60UN | |
VOLTAGED ADJ. GAMME | 4.5~ 5.5V | |
ONDULATION & BRUIT (maximum.) Remarque.2 | 150mVp-p | |
VOLTAGE TOLERANCE Note.3 | ±2,0% | |
LOAD REGULATION Note.5 | ±1.5% | |
LINE REGULATION Note.4 | ±0,5% | |
TENIR LE TEMPS | 20ms at full load | |
INSTALLATION, RISE TIME | 600MS,40ms at full load | |
Protection | OVER VOLTAGE | 5.75~ 6.75V Mode de protection :Shut off 0/p volltage, clamping by zener diode |
OVER LOAD | Above 150% rated output power Mode de protection :Hiccup mode, recovers automatically after fault condition is removed |
|
Sécurité | RÉSISTANCE À LA TENSION | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 approuvé | |
RÉSISTANCE À L'ISOLEMENT | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VCC / 25 / 70% RH | |
NORMES CEM | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
Environment | HUMIDITÉ DE TRAVAIL | 20 ~ 90% RH non-condensing |
TEMPÉRATURE DE TRAVAIL | -20 ~ +70 (Refer to output load derating curve) | |
TEMP.. COEFFICIENT | ± 0.03%/ | |
STORAGE TEMP., HUMIDITÉ | -40 ~ +85 , 10 ~ 95% RH | |
VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. chacun le long de X, Oui, Axes Z | |
Autres | DIMENSION | 215*115*30mm (L*L*H) |
MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 | |
Note | je. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Ondulation & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% à 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies??/td> |
Avis
Il n'y a pas encore d'avis.