Novastar MRV366 LED vastuvõtukaart koos 16 HUB75 pordid

Novastar MRV366 LED vastuvõtukaart koos 16 HUB75 pordid

The MRV366 is a new receiving card developed by NovaStar. A single MRV366 loads up to 512×256 pixels.

The MRV366 supports pixel level brightness and chroma calibration, which effectively removes color difference, greatly improves display consistency of LED images, and presents finer displays to users.

Software and hardware designs of the MRV366 have fully concerned users’ deployment, operating and maintenance scenarios, võimaldades lihtsamat kasutuselevõttu, stabiilsem töö ja tõhusam hooldus.

Riistvara disain:

Integrates 16 standard HUB75 connectors, which makes the HUB board unnecessary.

Adopts the Gigabit Ethernet port, which can connect to the PC.

Tarkvara disain:

Supports pixel level brightness and chroma calibration.

Supports setting of images pre-stored in the receiving card.

Supports status detection of temperature, Pinge, Ethernet cable communication and video source signals.

Supports the 5-pin LCD module.

Novastar MRV366 LED vastuvõtukaart koos 16 HUB75 pordid

Funktsioonid	Kirjeldus
Supporting pixel level brightness and chroma calibration	Brightness and chroma calibration on NovaLCT for each pixel could remove color difference effectively, make the brightness and chroma of the whole screen highly consistent, and improve the display effect.
Supporting setting of images pre-stored in the receiving card	NovaLCT-s, the specified images could be set as the screen startup image and images used when the Ethernet cable is disconnected or no video source signal is available.
Supporting status detection of temperature, Pinge, Ethernet cable communication and video source signals	NovaLCT-s, the status of receiving card’s temperature, Pinge, Ethernet cable communication and video source signals can be detected.
Supporting LCD module	Supports NovaStar’s general 5-pin LCD moodul. The LCD module is connected to the HUB board to display temperature, Pinge, vallaline operating time and total operating time of the receiving card.
Supporting readback of configuration file	NovaLCT-s (V5.0.0 or later), a configuration information stored in the receiving card can be read back.
Supporting readback of firmware version	NovaLCT-s (V5.0.0 or later), a firmware versions of the receiving card can be read back.

 

The MRV366 is applied to the LED display synchronous system which is generally composed of the LED display, vastuvõtukaart, LED display controller and controller peripherals. The receiving card is connected to the LED display over HUB connectors.

The synchronous system requires connecting a computer to display the computer’s images and texts on the LED display. The synchronous system’s structure is shown in the following figure.