Controlador de vídeo con pantalla LED todo en uno con procesador de vídeo LED Novastar VX600

Controlador de vídeo con pantalla LED todo en uno con procesador de vídeo LED Novastar VX600.

The VX600 is NovaStar’s new all-in-one controller that integrates video processing and video control into one box. Cuenta con 6 Puertos Ethernet y admite controlador de vídeo., Convertidor de fibra y modos de trabajo Bypass.. A VX600 unit can drive up to 3.9 millones de píxeles, con el ancho y alto máximo de salida hasta 10,240 píxeles y 8192 pixels respectively, which is ideal for ultra-wide and ultra-high LED screens.

The VX600 is capable of receiving a variety of video signals and processing high-resolution images. Además, el dispositivo presenta escalado de salida continuo, baja latencia, Brillo a nivel de píxel y calibración de croma y más, para presentarle una excelente experiencia de visualización de imágenes.

¿Qué es más?, the VX600 can work with NovaStar’s supreme software NovaLCT and V-Can to greatly facilitate your infield operations and control, como la configuración de pantalla, Configuración de copia de seguridad del puerto Ethernet, gestión de capas, Gestión preestablecida y actualización de firmware..

Gracias a sus poderosas capacidades de procesamiento y envío de video y otras características sobresalientes, the VX600 can be widely used in applications such as medium and high-end rental, sistemas de control de escenario y pantallas LED de tono fino.

Novastar VX600 LED Video Processor All-in-one LED Display Video Controller Features??/fuerte>

·Input connectors
1HDMI 1.3 (EN & BUCLE)
1HDMI 1.3
1xDVI (EN & BUCLE)
1x 3G-SDI (EN & BUCLE)
1x 10G optical fiber port (OPT1)

·Output connectors
6x puertos Gigabit Ethernet
A single device unit drives up to 3.9 millones de píxeles, with a maximum width of 10,240 píxeles y una altura máxima de 8192 píxeles.
2x Fiber outputs
OPTAR 1 copies the output on 6 Puertos Ethernet.
OPTAR 2 copies or backs up the output on 6 Puertos Ethernet.
1HDMI 1.3
For monitoring or video output

·Self-adaptive OPT 1 for either video input or sending card output Thanks to the self-adaptive design, OPTAR 1 can be used as either an input or output connector, depending on its connected device.

·Audio input and output
Audio input accompanied with HDMI input source
Audio output via a multifunction card
Output volume adjustment supported

·Low latency
Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled.

·3x layers
Adjustable layer size and position
Adjustable layer priority

·Output synchronization
An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync.

·Powerful video processing
Based on SuperView III image quality
processing technologies to provide stepless
output scaling
One-click full screen display
Free input cropping

·Easy preset saving and loading
Arriba a 10 user-defined presets supported
Load a preset by simply pressing one button

·Multiple kinds of hot backup
Backup between devices
Backup between Ethernet ports
Backup between input sources

·Mosaic input source supported
The mosaic source is composed of two sources
(2K× accessed to the OPT 1.

·Up to 4 units cascaded for image mosaic

·Three working modes
Controlador de vídeo
Convertidor de fibra
Bypass

·All-round color adjustment
Input source and LED screen color adjustment supported, including brightness, contraste,saturación, hue and Gamma Pixel level brightness and chroma calibration

·Work with NovaLCT and NovaStar calibration software to support brightness and chroma calibration on each LED, effectively removing color discrepancies and greatly improving LED display brightness and chroma consistency,permitiendo una mejor calidad de imagen.

·Multiple operation modes

Control the device as you wish via V-Can,NovaLCT or device front panel knob and buttons.