MeanWell LRS-350-5 Fuente de alimentación conmutada para pantalla de vídeo LED (5V 60A 300W).
Caso:806 Tamaño:215×115×30mm.
Fuerza: 300W..
100% prueba de quemado a plena carga
Universal AC input/ full range
Función PFC activa incorporada, FP>0.95
Protecciones: Short circuit/ Over load/ Over voltage
Indicador LED de encendido
1 año de garantía
UL aprobado
MeanWell LRS-350-5 Switching LED Video Screen Power Supply Product Specifications :
Modelo | LRS-350-5 | |
Aporte | Voltage Range | 85~ 264VAC 120~ 370VAC |
FREQUENCY RANGE | 47 ~ 63Hz | |
AC CURRENT (Tipo.) | 3.5A/115VAC 1.5A/230VAC | |
CORRIENTE DE FUGA | <2mamá / 240VACACIONES | |
CORRIENTE DE ENTRADA (Tipo.) | COLD START 65A/230VAC | |
EFICIENCIA (Tipo.) | 83% | |
Producción | CORRIENTE NOMINAL | 60A |
VOLTAJE CC | 5V | |
POTENCIA NOMINAL | 300W. | |
RANGO ACTUAL | 0-60A | |
VOLTAGED ADJ. RANGO | 4.5~ 5.5V | |
ONDA & RUIDO (máx.) Nota.2 | 150mVp-p | |
VOLTAGE TOLERANCE Note.3 | ±2,0% | |
LOAD REGULATION Note.5 | ±1.5% | |
LINE REGULATION Note.4 | ±0,5% | |
TIEMPO DE ESPERA | 20ms at full load | |
CONFIGURACIÓN, RISE TIME | 600EM,40ms at full load | |
Protección | OVER VOLTAGE | 5.75~ 6.75V Tipo de protección :Shut off 0/p volltage, clamping by zener diode |
OVER LOAD | Above 150% rated output power Tipo de protección :Hiccup mode, recovers automatically after fault condition is removed |
|
Seguridad | SOPORTAR TENSIÓN | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 aprobado | |
RESISTENCIA AL AISLAMIENTO | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VCC / 25 / 70% RH | |
ESTÁNDARES EMC | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
Environment | HUMEDAD DE TRABAJO | 20 ~ 90% HR sin condensación |
TEMPERATURA DE TRABAJO | -20 ~ +70 (Refer to output load derating curve) | |
TEMPERATURA. COEFICIENTE | ± 0.03%/ | |
STORAGE TEMP., HUMEDAD | -40 ~ +85 , 10 ~ 95% RH | |
VIBRACIÓN | 10 ~ 500Hz, 2G 10min./1cycle, 60mín.. cada uno a lo largo de X, Y, ejes Z | |
Otros | DIMENSIÓN | 215*115*30milímetros (L*An*Al) |
MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 | |
Nota | I. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Onda & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% a 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies??/td> |
Reseñas
Aún no hay reseñas.