MEANWell NEL-400-5 Switching Power Supply Manufacturer.
Velikost:215× 115 × 30 mm.
Moc: 400W.
Vysoká účinnost až 90%.
Vestavěná aktivní funkce PFC, PF>0.95.
LED indikátor pro zapnutí.
Forced air cooling by built in DC Fan with fan speed control function.
1U nízký profil 30mm
Vysoká účinnost, Long life and high reliability
Ochrany: Zkrat / Přetížení / Přepětí / nad teplotou
1 rok záruka
MEANWell NEL-400-5 Switching Power Supply Manufacturer Product Specifications :
| Model | NEL-400-5 | |
| Vstup | Voltage Range | 85~ 264VAC 120~ 370VAC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| AC CURRENT (Typ.) | 3.5A/115VAC 1.5A/230VAC | |
| ÚNIKOVÝ PROUD | <2mA / 240VAC | |
| INRUSH PROUD (Typ.) | COLD START 65A/230VAC | |
| ÚČINNOST (Typ.) | 84% | |
| Výstup | JMENOVITÝ PROUD | 80A |
| DC NAPĚTÍ | 5PROTI | |
| JMENOVITÝ VÝKON | 400W | |
| AKTUÁLNÍ ROZSAH | 0-80A | |
| VOLTAGED ADJ. ROZSAH | 4.5~ 5.5V | |
| VLNĚNÍ & HLUK (max.) Poznámka.2 | 150mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±2,0 % | |
| LOAD REGULATION Note.5 | ±1.5% | |
| LINE REGULATION Note.4 | ±0,5 % | |
| VYDRŽTE ČAS | 20ms at full load | |
| NASTAVENÍ, RISE TIME | 600paní,40ms at full load | |
| Ochrana | OVER VOLTAGE | 5.6~ 7V Typ ochrany :Shut off 0/p volltage, clamping by zener diode |
| OVER LOAD | Above 150% rated output power Typ ochrany :Hiccup mode, recovers automatically after fault condition is removed |
|
| Bezpečnost | ODOLNÉ NAPĚTÍ | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 schválený | |
| IZOLAČNÍ ODOLNOST | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH | |
| STANDARDY EMC | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
| Environment | PRACOVNÍ VLHKOST | 20 ~ 90% RH non-condensing |
| PRACOVNÍ TEPLOTA | -20 ~ +70 (Refer to output load derating curve) | |
| TEPL. SOUČINITEL | ± 0.03% | |
| STORAGE TEMP., VLHKOST | -40 ~ +85 , 10 ~ 95% RH | |
| VIBRACE | 10 ~ 500 Hz, 2G 10min./1cycle, 60min. každý podél X, Y, osy Z | |
| Jiní | DIMENZE | 215*115*30mm (L*Š*V) |
| MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
| Poznámka | já. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Vlnění & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% na 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies. |
|
Recenze
Zatím nejsou žádné recenze.