MEANWell NEL-400-5 Switching Power Supply Manufacturer.
Veličina:215×115×30mm.
Snaga: 400W.
Visoka efikasnost do 90%.
Ugrađena aktivna PFC funkcija, PF>0.95.
LED indikator za uključenje.
Forced air cooling by built in DC Fan with fan speed control function.
1U niski profil 30mm
Visoka efikasnost, Long life and high reliability
Zaštite: Kratki spoj / Preopterećenje / Prenapon / preko temperature
1 godina garancije
MEANWell NEL-400-5 Switching Power Supply Manufacturer Product Specifications :
Model | NEL-400-5 | |
Input | Voltage Range | 85~ 264VAC 120~ 370VAC |
FREQUENCY RANGE | 47 ~ 63Hz | |
AC CURRENT (Tip.) | 3.5A/115VAC 1.5A/230VAC | |
STRUJA curenja | <2mA / 240VAC | |
INRUSH CURRENT (Tip.) | COLD START 65A/230VAC | |
EFIKASNOST (Tip.) | 84% | |
Izlaz | RATED CURRENT | 80A |
DC VOLTAGE | 5V | |
RATED POWER | 400W | |
CURRENT RANGE | 0-80A | |
VOLTAGED ADJ. RANGE | 4.5~ 5.5V | |
RIPPLE & BUKA (max.) Napomena.2 | 150mVp-p | |
VOLTAGE TOLERANCE Note.3 | ±2,0% | |
LOAD REGULATION Note.5 | ±1.5% | |
LINE REGULATION Note.4 | ±0,5% | |
VRIJEME ZADRŽAVANJA | 20ms at full load | |
SETUP, RISE TIME | 600ms,40ms at full load | |
Zaštita | OVER VOLTAGE | 5.6~ 7V Vrsta zaštite :Shut off 0/p volltage, clamping by zener diode |
OVER LOAD | Above 150% rated output power Vrsta zaštite :Hiccup mode, recovers automatically after fault condition is removed |
|
Sigurnost | IZDRŽI NAPON | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 odobreno | |
OTPORNOST NA IZOLACIJU | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH | |
EMC STANDARDI | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
Environment | RADNA VLAŽNOST | 20 ~ 90% RH non-condensing |
RADNA TEMP | -20 ~ +70 (Refer to output load derating curve) | |
TEMP. COEFFICIENT | ± 0.03% | |
STORAGE TEMP., VLAŽNOST | -40 ~ +85 , 10 ~ 95% RH | |
VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. svaki duž X, Y, Z osi | |
Drugi | DIMENZIJA | 215*115*30mm (D*Š*V) |
MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
Napomena | I. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Ripple & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies. |
Recenzije
Još nema recenzija.