MeanWell HSP-200-5 Switching LED Panel Power Supply.
Model Number:HSP-200-5.
Case Size:210×62×31mm.
ኃይል: 200ወ
Output Type:ነጠላ
Output Current:40ሀ
የውጤት ቮልቴጅ:5ቪ
የውጤት ኃይል:101 ??200ወ
Output Frequency:47 ~ 63Hz
የግቤት ቮልቴጅ:90~ 264 ቪ.ሲ
ማረጋገጫ:UL TUV CB EMC CE
ቅልጥፍና:88.5%
Ouput Voltage Adj.
Range:4.5~ 5.5 ቪ
መተግበሪያ:Industries mechanica automation, ወዘተ
ባህሪ:Low profile 31mm;ፒኤፍሲ; ኮንፎርማል የተሸፈነ
MeanWell HSP-200-5 Switching LED Panel Power Supply Product Specifications :
| ሞዴል | HSP-200-5 | |
| ግቤት | Voltage Range | 85~ 264VAC 120~ 370VAC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| AC CURRENT (ተይብ።) | 3.5A/115VAC 1.5A/230VAC | |
| መፍሰስ ወቅታዊ | <2ኤምኤ / 240ቪኤሲ | |
| አሁኑን አስገባ (ተይብ።) | COLD START 65A/230VAC | |
| ቅልጥፍና (ተይብ።) | 88.5% | |
| ውፅዓት | የአሁን ደረጃ ተሰጥቶታል። | 40ሀ |
| የዲሲ ቮልቴጅ | 5ቪ | |
| ደረጃ የተሰጠው ኃይል | 200ወ | |
| የአሁኑ ክልል | 0-40ሀ | |
| VOLTAGED ADJ. ክልል | 4.5~ 5.5V | |
| RIPLE & ጫጫታ (ከፍተኛ) ማስታወሻ.2 | 150mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ± 2.0% | |
| LOAD REGULATION Note.5 | ±1.5% | |
| LINE REGULATION Note.4 | ± 0.5% | |
| ጊዜ ይቆዩ | 20ms at full load | |
| ማዋቀር, RISE TIME | 600ወይዘሮ,40ms at full load | |
| ጥበቃ | OVER VOLTAGE | 5.5~ 7V የመከላከያ ዓይነት :Shut off 0/p volltage, clamping by zener diode |
| OVER LOAD | Above 150% rated output power የመከላከያ ዓይነት :Hiccup mode, recovers automatically after fault condition is removed |
|
| ደህንነት | የቮልቴጅ መቋቋም | አይ/ፒ-ኦ/ፒ:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| SAFETY STANDARDS Note 6 | UL60950-1, CB(IEC60950-1),CCC GB4943, 1:2011 ጸድቋል | |
| ማግለል መቋቋም | አይ/ፒ-ኦ/ፒ, አይ/ፒ-ኤፍጂ, ኦ/ፒ-ኤፍ.ጂ:100M Ohms / 500ቪዲሲ / 25 / 70% አርኤች | |
| EMC ደረጃዎች | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254 | |
| Environment | የስራ እርጥበት | 20 ~ 90% RH non-condensing |
| የሚሰራ ቴምፕ | -20 ~ +70 (Refer to output load derating curve) | |
| TEMP. በቂ | ± 0.03% | |
| STORAGE TEMP., እርጥበት | -40 ~ +85 , 10 ~ 95% አርኤች | |
| ንዝረት | 10 ~ 500Hz, 2G 10min./1cycle, 60ደቂቃ. እያንዳንዳቸው በ X, ዋይ, Z መጥረቢያዎች | |
| ሌሎች | DIMENSION | 215*62*31ሚ.ሜ (L*W*H) |
| MTBF | 1608.8K hrs min. MIL-HDBK-217F (25 ) | |
| ማስታወሻ | አይ. Al parameters NOT specialy mentioned are measured at 230VAC input. rated load and 25??of ambient temperature. 2 Ripple & noise are measured at 20MHz Of bandwidth by usig a I2??twisted pair-wire terminated with a 0.1UI & 470 Parallel capacitor 3. Tolerance : includes set up tolerance. line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% ወደ 100% rated load. 6. For the request of GEl4943.1.the power soppy is only suable for use in the altitude 2000m below and the non tropical climate condrtion. 7. The power supply is considered a component which will be instated into a final equipment The final equipment must be re-confirmed that it still mesh EMC drectives. For guidance on how to perform the EMC tests. please refer to ‘EMI testing of component power supplies??/td> |
|
ግምገማዎች
እስካሁን ምንም ግምገማዎች የሉም.