Sale!

Colorlight i5A-905 LED Display Receiving Card

Original price was: $33.75.Current price is: $13.50.

-60%

Buy Colorlight led display screen controller at factory prices for your video wall panels.

Loading Capacity: 256×256 Pixel.

1) Support advanced sewing, color reproduction;
2) Support LCD display and cabinet monitoring;
3) Support Multi-batch calibration, program backup;
4) Support low latency, support gray-scale refinement.

Worldwide shipping on all orders.

  • 30 days easy returns
  • Order yours before 2.30pm for same day dispatch
Guaranteed Safe Checkout

Colorlight i5A-905 LED Display Receiving Card is specially designed for the compact and portable card with video screen, such as led color screen or casting aluminum cabinet, etc.

It inherits all the advantages and features i5A had. Meanwhile, i5A-905 possesses colorlight unique dual receiving card backup technique, to support one cabinet with two receiving cards, mutual backup, more reliable in the key moment, and you will get moderate receiver card price online.

Colorlight i5A-905 LED Video Screen Display Receiver Card need Colorlight LEDVISION Software to configure,please check the following software and manual

Colorlight i5A-905 LED Receiving Card, With Stable Quality, Easy Operation, Fast Tech Response for after sale service


Colorlight i5A-905 LED Display Receiving Card Features

·Tiny size, special designed for the compact structure designs, like color screen and casting aluminum cabinet.

·Power supply from pin board without the need of external power supply, enhance hardware stability.

·New processing core, perfect in display effect.

·High refresh rate, high gray scale and high brightness with conventional chips.

·Perfect performance under lower grayscale status.

·Better detail processing: Partial dark at row, reddish at low gray, shadow problems can be solved.

·Supports the effective display at first grayscale value.

·Supports 14 bits high-precision point-by-point calibration in the Brightness and chromaticity.

·Supports conventional chips, PWM chips and lighting chips, etc.

·Supports any scan mode from static to 1/32 scan.

·Supports any pumping point and data arbitrary offset, and realize various freeform display, spherical display, diamond display, creative display, etc.

·Supports 16 groups RGBR??signal output and 24 groups RGB in maximum.

·Large loading capacity.

·Advanced design, high quality components, rigorous aging test, zero malfunction of final products.

·Wide working voltage range with DC 3.3~6V.

·Supports dual receiving card backup, loop backup, and dual-machine backup, etc.

·Compatible with Gigabit NIC, S series Sender, Z series Sender and C series Sender, etc.


Control system parameters
Sending device Compatible with Gigabit NIC, S series Sender, Z series Sender and C series Sender, etc
Control area of every  card Full-color: 256×256 pixels, and for special applications the column can be extended to 1024 pixels.
Correction area of every  card 256×256 pixels
Cascade control area of the largest regional 65536×65536 pixels
Cascade card number 65536 PCS
Network port exchange Supported, arbitrary use
Synchronization Nanosecond synchronization between the card and the card
Display Quality
Refresh rate for conventional chip Static: 64×64, up to 16000Hz

1/8 scan: 128×128, up to 10000Hz

Serial frequency 0.2MHz~41.7MHz
Gray Level Maximum 65536 levels
Minimum unit of OE values 8ns, 8ns multiples steps
Blanking Circuit Supports CD4051 blanking circuit
Gray scale compensation Each level grayscale compensate separately
Display module compatibility
Chip supports Supports conventional chips, PWM chips, lighting chips and other mainstream chips
PWM chip supports Supports hundreds of different specifications of the PWM chip, such as MBI, MY, SUM, etc
Scan mode Conventional mode and high refresh rate mode to support refresh rate multiplied
Scan type Supports static sweep to 1/32 scan
Module Specifications Support Supports 4096 pixels within any row, any column
The direction of the cable Supports route from left to right, from right to left, from top to bottom, from bottom to top
Data Sets Different sets in different work modes, refer to interface definitions
Data folded Supports to fold on the same or opposite direction, which improve refresh rate significantly
Module snapshot Supports any pumping point
Data serial transmission RGB, R8G8B8, R16G16B16, etc in the form of serial
Compatible device and interface type
Communication distance UTP cable 40m CAT6 cable 70m

Optic fiber: Single Mode Fiber Converter

Multi-Mode Fiber Converter  50m (Use RP Repeater to extend unlimited)

Compatible with transmission equipment Gigabit switch, fiber converter, optical switches
DC power interface Wire terminal or HUB board
HUB Interface Type Refer to signal interface definition below
Physical parameters
Size 137×48mm
Input voltage DC 3.3V~6V
Rated current 0.6A
Rated power 3W
Storage and transport temperature -50℃~125
Operating Temperature -25℃~75
Body static resistance 2KV
Weight 70g
Monitoring function (in conjunction with mutil-function card)
Monitoring functions Real time monitoring environment information like temperature, humidity, smoke
Remote Control Supports for relay switch to turn on/off the power supply of equipments remotely
Pixel level calibration
Brightness calibration Supported
Chromaticity calibration Supported
Other features
Dual Receiving Card Backup Supports one cabinet with two receiving card

Consult our technicians for more details

Hot backup Supports loop backup and dual-machine backup
Shaped screen Supports various freeform display, spherical display, creative display, etc. through the data arbitrary offset

 

Reviews

There are no reviews yet.

Be the first to review “Colorlight i5A-905 LED Display Receiving Card”

Your email address will not be published. Required fields are marked *